background-waves

48736

Product Status| Obsoletei

48736

TIMER INTERIOR LIGHT 10A | Series: FlexMod Interior Light Timers
info
The FlexMod Electronic Timer for Lighting prevents the internal lights inside a trailer from being left on and draining the battery. Vehicle operator operates a momentary switch which turns lights on, allowing safe operation inside the cargo compartment. After 20 minutes the FlexMod flashes the lights and gives the operator increasingly urgent warnings to either exit the cargo compartment or reactivate the timer before the lights go out.

Perfect for use on delivery vehicles, utility vehicles, trailers or straight trucks.

Mounting: Four 9/32" (7.2mm) dia. holes
Size: 4.0 x 2.7 x 1.3" (102 x 69 x 33mm)

Operating Sequence
  1. Operator turns cargo compartment lights On.
  2. After 20 minutes compartment lights provide warning by blinking three times. Operator may re-set switch at this time - cycle will start again.
  3. After another 20 seconds, lights blink three times at a faster rate. Operator may re-set switch at this time - cycle will start again.
  4. After a further 20 seconds, lights blink three times at a faster rate and then switch Off. Operator may re-set switch at this time - cycle will start again.
PropertyValue
Current Rating (Continuous) in Amps
10
Voltage Rating (V)
24
Ingress Protection
IP67
Housing
Blue Thermoplastic
Humidity
0 to 90% RH
Agency Approval - Shock
SAE J1455
Agency Approval - Vibration
10-500 Hz
Connector
8-pin Sealed Deutsch type
Load dump
+ 150 V
Mounting Hole Dimensions (in)
4 x 2.7 x 1.31
Overcurrent protection
15 A
Temperature Maximum (°F)
185
Temperature Minimum Celsius
-40
Temperature Minimum (°F)
-40
Voltage Transient
+/- 600
  • Compact (4x3x1”) unit can mount anywhere on vehicle and is sealed to IP67 waterproof, dustproof, and vibration-proof ratings
  • No moving parts means higher reliability than conventional mechanical egg timer units
  • Automatically turns interior lights off, which preserves starting battery charges and limits need for jump starts
  • Provides a series of increasingly urgent warnings before lights turn off, giving people the option to reset the unit or exit the work area
  • Factory programmable with a broad range of time and warning presets
  • 10 A rating means unit works with the brightest lighting systems
  • Unit is autoranging, sensing and operating in 12 V or 24 V systems

48736 Resources

Showing 1 to 1 of 1 Total Results
Share
Part NumberPart DescriptionRoHSPb-FreeRoHS (2015/863/EU) CertificateREACH (SVHC's) DeclarationREACH (SVHC's)Halogen FreeIPC-Material Declaration
48736TIMER INTERIOR LIGHT 10A

If the product environmental information that you are looking for does not appear in this tab, please complete the Product Environmental Information Request Form.