background-waves

HLVA6I23

Product Status| Activei

HLVA6I23

RELAY OUTPUT | Series: HLVA
info
The HLV Series is a single-phase undervoltage monitor designed to protect sensitive equipment from brownout or undervoltage conditions. Time delays are included to prevent nuisance tripping and short cycling. The 30A, 1hp rated, SPDT relay contacts allow direct control of motors, solenoids and valves. The output relay can be ordered with isolated SPDT contact to allow monitoring of one voltage and switching a separate voltage. Two undervoltage trip point ranges allow monitoring of 110 to 120VAC or 208 to 240VAC systems.


Operation
Upon application of input voltage the output relay remains de-energized. When the input voltage value is above the pull-in voltage, the restart delay begins. At the end of the restart delay, the output relay energizes. When the input voltage falls below the trip point, the trip delay begins. If the input voltage remains below the pull-in voltage for the entire trip delay the relay deenergizes. If the input voltage returns to a value above the pull-in voltage, during the trip delay, the trip delay is reset and the relay remains energized. If the input voltage falls below the trip point voltage during the restart delay, the delay is reset and the relay remains de-energized. Reset is automatic upon correction of an undervoltage fault.
Reset: Removing input voltage resets the output relay and the time delays.

PropertyValue
Input Voltage (V)
Min RMS Voltage: 70 Vac; Max RMS Voltage: 264 Vac
Output Form
Isolated SPDT
Termination Type
0.25 in. (6.3 mm) male quick connect terminals
Dimensions
3 H x 2 W x 1.5 D in. (76.7 x 50.8 x 38.1 mm)
Weight (kg)
0 Kg (kilogram)
Humidity
95% non-condensing
Input AC Line Frequency (Hz)
50 / 60
Insulation Resistance (Ω)
≥100
Output Load Rating (VA)
General Purpose: SPDT-NO: 125/240 Vac 30 A; SPDT-NC 15 A; Resistive: SPDT-NO: 125/240 Vac 30 A; 28 Vdc 20 A; SPDT-NC: 125/240 Vac 15 A; 28 Vdc 10 A; Motor Load: SPDT-NO: 125 Vac 1 hp; 240 Vac 2 hp; SPDT-NC: 125 Vac 1/4 hp; 240 Vac 1 hp
Output Type
Electromechanical relay
Power Consumption
≤4 VA
Pull In Voltage (V)
105% or trip point voltage
Repeat Accuracy (%)
±0.5% or 20 ms whichever is greater
Reset Time (ms)
≤150 ms
Restart Delay Range
3 - 300 s adjustable
Surge Protection
IEEE C62.41-1991 Level A
Time Delay Tolerance (%)
≤±5%
Trip Delay Range
3 s
Trip Point Accuracy (%)
±3% of trip point
Undervoltage Sensing Range (V)
Peak voltage sensing; 170 - 220 Vac
Isolation Voltage
≥1500 Vrms input to output
Mounting Method
Surface mount with one #10 (M5 x 0.8) screw
Operating Temperature Max (°C)
60
Operating Temperature Maximum Fahrenheit
140
Operating Temperature Minimum Celsius
-40
Operating Temperature Minimum Fahrenheit
-40
Storage Temperature Maximum Celsius
85
Storage Temperature Maximum Fahrenheit
185
Storage Temperature Minimum Celsius
-40
Storage Temperature Minimum Fahrenheit
-40

HLVA6I23 Resources

Showing 1 to 1 of 1 Total Results
Share
Part NumberPart DescriptionRoHSPb-FreeRoHS (2015/863/EU) CertificateREACH (SVHC's) DeclarationREACH (SVHC's)Halogen FreeIPC-Material Declaration
HLVA6I23RELAY OUTPUT

If the product environmental information that you are looking for does not appear in this tab, please complete the Product Environmental Information Request Form.