Link has been copied to clipboard
THDS610.25SA
DIGI-POWER (SINGLE SHOT) | Series: THDS
The THDS Series combines accurate timing circuitry with high power solid-state switching. It can switch motors, lamps, and heaters directly without a contactor. You can reduce labor, component cost, and increase reliability with these small, easy-to-use THDS Series timers.
Operation (Single Shot)
Input voltage must be applied before and during timing. Upon momentary or maintained closure of the initiate switch, the output energizes for a measured interval of time. At the end of the delay, the output de-energizes. Opening or reclosing the initiate switch during timing has no affect on the time delay. The output energizes if the initiate switch is closed when input voltage is applied.
Reset: Reset occurs when the time delay is complete and the initiate switch is opened. Loss of input voltage resets the time delay and output.
| Property | Value |
|---|---|
Input Voltage (V) | 230 V ac |
Output Form | NO - closed during timing |
Time Delay Range (s) | 0.25 s fixed |
Dimensions | 2 H x 2 W in. (50.8 x 50.8 mm) |
Circuitry | Encapsulated |
Dielectric Breakdown | ≥2000V terminals to mounting surface |
Humidity | 95% relative : non-condensing |
Initiate Time | ≤20 |
Input AC Line Frequency (Hz) | 50/60 |
Input Tolerance (%) | ±20% |
Insulation Resistance (Ω) | ≥100 |
Mounting Method | Surface mount with 1 #10 (M5 x 0.8) screw |
OFF Open State Leakage Current | ≅5 @230 V ac |
Operating Temperature Max (°C) | 60 |
Operating Temperature Maximum Fahrenheit | 140 |
Operating Temperature Minimum Celsius | -40 |
Operating Temperature Minimum Fahrenheit | -40 |
Minimum Output Load Current (A) | 100 |
Output Load Rating (VA) | 6 A steady state; 60 A inrush |
Output Type | Solid state |
Output Voltage Drop (V) | ≅2.5 V @ rated current |
Power Consumption | ≤2 VA |
Repeat Accuracy (%) | ±0.5% or 20 ms whichever is greater |
Reset Time (ms) | ≤150 |
Setpoint vs. Ambient Temperature and Operating Voltage | ≤±2% |
Storage Temperature Maximum Celsius | 85 |
Storage Temperature Maximum Fahrenheit | 185 |
Storage Temperature Minimum Celsius | -40 |
Storage Temperature Minimum Fahrenheit | -40 |
Termination Type | 0.25 in. (6.35 mm) male quick connect terminals |
Time Delay Tolerance (%) | ≤±1% |
Undervoltage Trip Voltage (%) | 0.25 s fixed |
THDS610.25SA Resources
Link has been copied to clipboardShowing 1 to 1 of 1 Total Results
Share
| Part Number | Part Description | RoHS | Pb-Free | RoHS (2015/863/EU) Certificate | REACH (SVHC's) Declaration | REACH (SVHC's) | Halogen Free | IPC-Material Declaration | |
|---|---|---|---|---|---|---|---|---|---|
| THDS610.25SA | DIGI-POWER (SINGLE SHOT) | View More |
If the product environmental information that you are looking for does not appear in this tab, please complete the Product Environmental Information Request Form.